Hello, I am looking to setup some policy based routing on an IOS-XR router. From what I understand, XR does not have PBR, but ABF. When looking at how ABF works, I don’t see how to set a next hop route (only next hop per TCP port). My question then would be, how does one accomplish this on XR? What I need to do is allow a particular IP block to only have access to one of our backbone carriers and not the others. We have their /24 only announced out the one carrier, but for outbound traffic, I want to make sure their traffic remains on that carrier but also have access to our local routes (all our local customers and local networks). Is this something that can be done with ABF or is this something that has to be done with VRF or VRF lite? If VRF/lite, does anyone have an example config that might be able to be shared as a starting point? We are running XR 4.3.0.
Thank you for your time. -Lee _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
