Hi , I have the below EEM script and am trying to do it using IOS XR
event
manager applet SLA_OUT
event snmp oid 1.3.6.1.4.1.9.9.42.1.2.9.1.6.2
get-type exact entry-op eq entry-val 1 exit-op eq exit-val 2 poll-interval 5
action 1.0 syslog msg "Test"
action 1.1 cli command "enable"
action 1.2 cli command "configure
terminal"
action 1.3 cli command "ip route 0.0.0.0
0.0.0.0 192.168.13.3"
action 1.4 syslog msg "There is a problem
on our Primary connection , move all the traffic to the Secondary Line"
event
manager applet SLA_OK
event snmp oid 1.3.6.1.4.1.9.9.42.1.2.9.1.6.2
get-type exact entry-op eq entry-val 2 exit-op eq exit-val 1 poll-interval 5
action 1.0 syslog msg "OK"
action 1.1 cli command "enable"
action 1.2 cli command "configure
terminal"
action 1.3 cli command "no ip route
0.0.0.0 0.0.0.0 192.168.13.3"
action 1.4 syslog msg "Our Primary
connection is functionin again , stop using the Secondary Line"
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
