G8032 will be another option for L2 with 3.3 msec CCM timers. Best Regards,
[http://www.cisco.com/web/europe/images/email/signature/horizontal06.jpg] Waris Sagheer Technical Marketing Manager Service Provider Access Group (SPAG) [email protected]<mailto:[email protected]> Phone: +1 408 853 6682 Mobile: +1 408 835 1389 CCIE - 19901 <http://www.cisco.com/> This email may contain confidential and privileged material for the sole use of the intended recipient. Any review, use, distribution or disclosure by others is strictly prohibited. If you are not the intended recipient (or authorized to receive for the recipient), please contact the sender by reply email and delete all copies of this message. For corporate legal information go to:http://www.cisco.com/web/about/doing_business/legal/cri/index.html From: adam vitkovsky <[email protected]<mailto:[email protected]>> Date: Monday, August 4, 2014 at 2:32 AM To: thiyagarajan b <[email protected]<mailto:[email protected]>> Cc: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [c-nsp] RPR in MetroE Oh my bad, sorry about the confusion, as Saku mentioned already REP is what you should be looking for to build L2 rings. RPR/SPR is for the optical domain. adam From: thiyagarajan b [mailto:[email protected]] Sent: Monday, August 04, 2014 10:05 AM To: Vitkovský Adam Cc: [email protected]<mailto:[email protected]> Subject: Re: [c-nsp] RPR in MetroE Thanks Adam for your suggestion, It takes lot of setup change for implementing MPLS in ME so I would rather go for RPR for now. But I am finding only Cisco 10700 series supports RPR when I refer to the cisco feature navigator. Warm Regards, Thiyagarajan B. On Sat, Aug 2, 2014 at 1:58 PM, Vitkovský Adam <[email protected]<mailto:[email protected]><mailto:[email protected]>> wrote: Hi, Sure 802.17 RPR is meant to supersede the STP for loop avoidance, faster convergence and better BW efficiency. However in order to deploy it all nodes in the ring have to support it. All ME series switches should support it. Though I'd recommend upgrading the kit to MPLS capable ME switches and to use rLFA to achieve sub 50ms convergence. adam -----Original Message----- From: cisco-nsp [mailto:[email protected]<mailto:[email protected]>] On Behalf Of thiyagarajan b Sent: Friday, August 01, 2014 3:07 PM To: [email protected]<mailto:[email protected]><mailto:[email protected]> Subject: [c-nsp] RPR in MetroE Hi, Can Resilient Packet Ring can be used in Metro Ethernet (L2) for loop avoidance instead of MSTP? Warm Regards, Thiyagarajan B. _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]><mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected]<mailto:[email protected]> https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
