I'd be interested in that as well. In particular whether all the tag manipulation pop/push/translate is possible when the EVC is mapped to a BD or PW.
adam > -----Original Message----- > From: cisco-nsp [mailto:[email protected]] On Behalf Of > Chris Jones > Sent: Tuesday, July 29, 2014 4:36 AM > To: [email protected] > Subject: [c-nsp] Cisco 6880 - EVC/MPLS Limitations > > Hi All, > > Trying to clarify some limitations surrounding the 6880X platform, in terms of > its support for MPLS and EVC. Specifically, the combination of the two of > them. > > From looking at the latest configuration guide (SUP2T/15.1SY) - > http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/15- > 1SY/config_guide/sup2T/15_1_sy_swcg_2T/ethernet_virtual_connection.ht > ml#pgfId-1081503 - it initially looks as though EVC is reasonably well > supported - until you get to the paragraph around restrictions. Specifically, > what isn't supported on EVCs seems to include EoMPLS, QinQ and Bridge > Domain Routing. > > In short - is it possible to terminate a pseudowire - or other MPLS L2 > machinery - into an EVC, either directly, or via a bridge-domain, on the 6880? > > > Regards, > > Chris > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
