Hi, > Also the OP should note that when you boot from from 12.2(52)SE to a later > versions, the boot loader will almost do a microcode upgrade on the C3560X > platform. Depending on the version involved, this can take up to 35 minutes > downtime per box. The release notes still don't mention this as a risk, > which is not good. It would be very helpful if cisco provided some > information on this in the release notes.
on recent versions you can do the microcode update BEFORE the reload (check the update-sw flag list!) which saves loads of down time(!) alan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
