Thanks all for your useful answers. I can see clearer now on the possibilities we have here.
Actually the exact goal of my request was to split one QSFP+ into 4 monomode SFP+ & connect 2 different remote equipments on the other end. This is a weird application, coming from a request of a customer using HP 5900 with 48*10G Base T + 4QSFP+ only & willing to connect a remote site with SFP+ equipments only. In this case indeed a CVR-QSFP-SFP10G QSFP to SFP+ converter may be enough, but I am note sure I can use it with an HPN equipment... Thank you again for your great help ! Best regards Gilles. > Message du 18/06/14 à 21h02 > De : "Andrew Miehs" > A : "Peter Persson" > Copie à : "[email protected]" > Objet : Re: [c-nsp] 40G QSFP to 4*10G SFP+ Breakout Optical Cable > > As I said, you should be able to use the cisco qspf-40g-sr4 and an mpo-12 to > lc breakout cable which you can then connect to sfp-10g-sr s. For single mode > you would need an alternative supplier for the qsfp who do something similar > for lr - like the plr4 from arista - but no idea if it works on a cisco, Sent > from a mobile device > On 19 Jun 2014, at 3:17, Peter Persson wrote: > > What > i think Gilles is looking for, is a way to buy active wavelengths on > > 10gigabit instead of 40gigabit? > > I dont use QSFPs in my net, so i dont > know the answer, but i think thats > the question from the begging? > > > Regards, > Peter > > > 2014-06-18 18:27 GMT+02:00 David Paul Zimmerman > : > > >> This may be a weird tangent to your question, but if you're running on a > >> Nexus 6004 (maybe other platforms too, but definitely the 6004) and don't > >> mind wasting a whole 40GE QSFP port to service a 10GE drop (say you're way > >> overprovisioned on 40GE capacity and can do that), you should check out >> > Cisco's CVR-QSFP-SFP10G QSFP to SFP+ converter. >> >> dp >> >> -----Original > Message----- >> From: cisco-nsp [mailto:[email protected]] On > Behalf Of >> Gilles Fabre >> Sent: Wednesday, June 18, 2014 4:38 AM >> To: > [email protected] >> Subject: [c-nsp] 40G QSFP to 4*10G SFP+ Breakout > Optical Cable >> >> Hi all >> >> I have been searching for 40G to 4*10G > cables (not DAC/Twinax but optical >> ones). >> Did you ever use such cables > ? is it reliable ? >> I did not find any monomode ones, I guess this is not > existing... any >> idea why (strength of signal ?) ? >> >> Thanks & best > regards >> Gilles >> >> >> > ___________________________________________________________ >> Mode, hifi, > maison,… J'achète malin. Je compare les prix avec Voila.fr >> > http://shopping.voila.fr/ >> _______________________________________________ > >> cisco-nsp mailing list [email protected] >> > https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at > http://puck.nether.net/pipermail/cisco-nsp/ >> >> > _______________________________________________ >> cisco-nsp mailing list > [email protected] >> > https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at > http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list > [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at > http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list > [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ ___________________________________________________________ Mode, hifi, maison,… J'achète malin. Je compare les prix avec Voila.fr http://shopping.voila.fr/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
