> > If you're using netflow v9 or flexible netflow there are some cautions > about using 'egress' together with 'ingress'. > > There are some very good write-ups on this. Google-fu: 'netflow egress > monitoring' >
Quick question for the list - Netflow V5 only supports ingress flows correct? But on a lab 7200/G1, config option is there for egress? (config)#interface GigabitEthernet0/2.200 (config-subif)#ip flow ? egress Enable outbound NetFlow ingress Enable inbound NetFlow monitor Apply a Flow Monitor to this interface Cheers. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
