Hi All, Has anyone encountered this issue on the ME3600/ME3800s;
Cisco 2960 - Layer 2 device terminating Layer 2 connections | | Layer 2 Trunk on 100Mbps port | Cisco ME3800 - Various layer 2 connections trunked up in VLANs for termination on ME3800 We are trying to apply some policers on the ME3800 for multiple 10Mbps circuits being delivered on the 2960 because some of them are on faster bearers. The problem is that when you try to apply a policy on the ME3x00 series and you add in an 11th policer for 10Mbps it throws up an error saying the port is oversubscribed and the config isn't allowed. You can't police 11+ VLANs for example to 10Mbps on a 100Mbps port. These devices are meant to go near/on the access layer where oversubscription lives :) Has anyone encountered this and has anyone overcome it? We have a TAC case open, they are almost definately going to say "that's what is supposed to happen". Cheers, James. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
