Hi All, Upgrade CEF and reload the router did fix the issue. Thank you all for your support!
Regard, Vannara On Sunday, May 4, 2014, Chris Griffin <[email protected]> wrote: > Yes, and be careful of CSCsq77464 if you have saved your config since the > exception... > > Tnx > Chris > > On 5/3/2014 8:41 AM, Gert Doering wrote: > >> Hi, >> >> On Sat, May 03, 2014 at 02:23:13PM +0700, vannara vuth wrote: >> >>> I'm also facing the similar issue. What was symtom on your router when >>> receiving the log message? Packet loss to v4 address on loop back as >>> well? >>> >> >> If you run into MLS CEF exception mode, some of your v4 traffic will >> be software switched, *and* subject to MLS rate limiters - so you'll >> see heavy packet loss on transit traffic to *some* destinations. >> >> Unfortunately the only way to clear the exception is to reboot. >> >> gert >> >> >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> >> > -- > Chris Griffin [email protected] > Sr. Network Engineer - CCNP Phone: (352) 273-1051 > CNS - Network Services Fax: (352) 392-9440 > University of Florida/FLR Gainesville, FL 32611 > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Sent from Gmail Mobile _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
