On Apr 23, 2014, at 12:39 AM, Mike Hale wrote: > We've seen really weird behavior with third party SFPs in the past. > NHR has been surprisingly solid for us across all out platforms so far > *knock on wood*. > > We've got some Finisar-branded SFPs in our ASR which work nicely (but > that's expected since Finisar is the OEM, IIRC, for Cisco's SFPs). > > Actually...check this out. > > https://supportforums.cisco.com/discussion/11445646/advice-needed-cisco-asr-1002-routers-sfps > > The GLC-T don't appear to be supported on first glance. The GE-T are. > Since your vendor calls them GLC-T (even though they claim to be > GE-T), that might be your issue?
I suspect you nailed it. The sticker says GLC-T, the idprom (or perhaps this is something IOS is generating based on some other properties of the GBIC) says "GE-T": Transceiver Type: = GE T (26) Of course it also claims the connector is an LC (or "LC."), which is beyond nonsensical: Connector type = LC. Vendor is supposed to be shipping something out to replace it, not sure what yet. I promise to follow-up for the archives when I've got something that works. Thanks, Charles > > On Tue, Apr 22, 2014 at 7:17 PM, CiscoNSP List > <[email protected]> wrote: >> >> Ive got some ASR1006's with SPA-5X1GE with NHR Gb copper SFP's that work >> fine....dont have any 1002-X's to test sorry. >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > -- > 09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
