I think the next line after "authentication keychain...." is "cryptographic-algorithm MD5"
On Tue, Apr 22, 2014 at 10:55 AM, M K <[email protected]> wrote: > Hi all > I am facing an issue when configuring EIGRP authentication between IOS and > IOS XR > > R1#sh run | sec key chain > key chain KEY > key 1 > key-string cisco > > R1#sh run int f0/0 | inc authen > ip authentication mode eigrp 1 md5 > ip authentication key-chain eigrp 1 KEY > > RP/0/0/CPU0:XR1#sh run key chain > Tue Apr 22 17:54:14.480 UTC > key chain KEY > key 1 > key-string password cisco > > router eigrp EIGRP_PROCESS > address-family ipv4 > autonomous-system 1 > interface Loopback0 > ! > interface GigabitEthernet0/0/0/0 > authentication keychain KEY > > Under the interface GigabitEthernet0/0/0/0 located under the EIGRP process > , I did not find an option for choosing MD5 > > Any ideas? > > Thanks > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
