Hi - thanks for that, sounds like it might be the case then. It's a 720-3BXL and the lab cards are 6748-GE-TX, while the production ones are a mixture of 6748 and 6704/6708.
Do you know where I can find any documentation which might indicate which cards support IP options in an ACL? Cheers! Robert Williams Custodian Data Centre Email: [email protected] http://www.CustodianDC.com -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Dobbins, Roland Sent: 18 April 2014 19:46 To: [email protected] Subject: Re: [c-nsp] IP Options Drop On Apr 18, 2014, at 11:40 PM, Robert Williams <[email protected]> wrote: > The lab kit is running 15.1(2)SY1 in the tests shown above. What Sup/linecards? Are you sure your Sup/linecards support evaluating options as a classifier? If they don't, then even though the options keyword shows up in the ACL, it's just textual, and you're actually doing a deny ip any any. ----------------------------------------------------------------------- Roland Dobbins <[email protected]> // <http://www.arbornetworks.com> Luck is the residue of opportunity and design. -- John Milton _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
