I tried to make this work in my network back in mid-2012... I think I was on 4.1.2 at the time....
I worked with the Cisco TAC IOS XR Team and found this note from an old email from back then.... you might need to validate this old note that I got from tac. Note: TAC determined that bvi isn't supported in mdt , should be in 4.3.1 is target for bvi mvpn support... 4.2.2 (probably skipped) 4.2.3 (9/2012) 4.3.0 (12/2012) 4.3.1 (3/2013) Aaron -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Vitkovský Adam Sent: Monday, April 14, 2014 9:17 AM To: Phil Mayers; [email protected] Subject: Re: [c-nsp] Rosen-Draft MVPN over BVI 4.2.3 > I have no experience on XR or BVI, but one random thought to throw in; > are you using P-ASM or P-SSM? I've had problems with recent IOS / > NX-OS releases using P-ASM, and have since moved to P-SSM with BGP > mdt; my guess is that the P-ASM code is not widely used and has > bit-rotted at Cisco's end. > > I mention this because the symptoms I saw were similar to what you > describe - (*,g) would form, but no (s,g). Yes please in the core I'm using SSM. But in the VRF there's just SM and that is where I can't get the (S,G) states. adam _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
