Hi All,
Been googling for a bit now, but this information is seemingly missing my
browser. I know that it's not really important, but for my own curiosity
and sanity. What "Capacity" does "Capacity Used" refer to on a ADSL WIC when
issuing the show atm int xxx command?
For example:
#sh dsl int atm0/0/0
ATM0/0/0
.
Capacity Used: 59% 83%
...
DS Channel1 DS Channel0 US Channel1 US
Channel0
Speed (kbps): 0 10239 0 1020
.
#sh int atm0/0/0
ATM0/0/0 is up, line protocol is up
.
30 second input rate 19000 bits/sec, 8 packets/sec
30 second output rate 15000 bits/sec, 11 packets/sec
Clearly the "Capacity Used", is not referring to the capacity that *I* have
available on my ADSL circuit. I'm wondering just what capacity is this
referring too? It's really not important - I'm just curious.
Many thanks,
Chris.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
