On Mon, 17 Mar 2014 06:31 +0000, Simon Lockhart wrote:
>
> This one is one I'd not tried before and looks very useful. I assume this is
> reporting the ESP utilisation, and thus in the case of my ESP-40, how close I
> am to the 40Gbps aggregate switching limit.
>
> Do you know if this information is obtainable by SNMP?
These can be found in CISCO-ENTITY-QFP-MIB::ceqfpUtilizationTable
(1.3.6.1.4.1.9.9.715.1.1.6), indexed by ENTITY-MIB::entPhysicalIndex:
CISCO-ENTITY-QFP-MIB::ceqfpUtilInputPriorityPktRate.9027.fiveSeconds =
Counter64: 251 packets per second
CISCO-ENTITY-QFP-MIB::ceqfpUtilInputPriorityPktRate.9027.oneMinute =
Counter64: 277 packets per second
CISCO-ENTITY-QFP-MIB::ceqfpUtilInputPriorityPktRate.9027.fiveMinutes =
Counter64: 252 packets per second
CISCO-ENTITY-QFP-MIB::ceqfpUtilInputPriorityPktRate.9027.sixtyMinutes =
Counter64: 255 packets per second
|
CISCO-ENTITY-QFP-MIB::ceqfpUtilProcessingLoad.9027.fiveSeconds = Gauge32: 2
percent
CISCO-ENTITY-QFP-MIB::ceqfpUtilProcessingLoad.9027.oneMinute = Gauge32: 1
percent
CISCO-ENTITY-QFP-MIB::ceqfpUtilProcessingLoad.9027.fiveMinutes = Gauge32: 1
percent
CISCO-ENTITY-QFP-MIB::ceqfpUtilProcessingLoad.9027.sixtyMinutes = Gauge32:
1 percent
Best regards,
Klaus
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
