Did you try a factory reset of the AP yet? On Wed, Mar 12, 2014 at 1:43 PM, Christopher Werny <[email protected]> wrote: > Hi everyone, > > I have a small WLC deployment (1 2504 WLC running 7.6.110.0) and 12 APs (8 x > 1242 and 4 x 1602). All APs are joining the WLC correctly. > The issue that I have is that configuration changes (e.g. activating SSH > access on the APs) do not get applied to the 1242 APs. This only affects the > 1242 APs, the 1602 are working as intended. > > When I apply the changes, the following errors messages appear on the 1242 > APs (I am connected over the console port). > > *Mar 12 15:15:27.519: %CAPWAP-3-ERRORLOG: Validate Msg: msg type 12 does not > supported > payload 215 > > *Mar 12 15:15:27.519: %CAPWAP-3-ERRORLOG: Validate Msg: error in Unknown > Payload(215) > payload (received length = 9, payload type = 215) > > *Mar 12 15:15:27.519: %CAPWAP-3-ERRORLOG: Failed to validate vendor specific > message > element type 215 len 9. > > *Mar 12 15:15:27.519: %CAPWAP-3-ERRORLOG: Failed to decode Configuration > update request. > > *Mar 12 15:15:27.520: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to > process message > type 7 state 11. > > *Mar 12 15:15:27.520: %CAPWAP-3-ERRORLOG: Failed to handle capwap control > message from > controller > > *Mar 12 15:15:27.520: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap > packet from > 172.20.40.10 > > Googling around a little bit, I found the following thread in the support > forums: > > https://supportforums.cisco.com/discussion/12115351/wlc-5508-lap1242-failed-handle-capwap-control-message-controller > > This thread mentioned that it could be that there is not enough space on the > AP to hold the configuration. > I verified the free space on the APs and it is around 10 Megabyte on every > AP. So this *should* be enough. > > TAC Case is open, but didn't resolve the issue yet, as the engineer > redirected me to the thread above. > > So I thought I give it a shot and query the wisdom of this list. > > Did anyone run into this issue, or have some tips/hints on how to resolve it? > > Appreciate your input. > > Best, > Chris > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/
-- 09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
