The private Vlans configuration is replicated , but when I tried to ping between the community clients it was not successfulThe issue for me is where to place the promiscuous port? knowing that it's configured on SW1 in the first manner
> From: [email protected] > Date: Wed, 12 Mar 2014 15:22:00 +0000 > Subject: Re: [c-nsp] Private Vlans > To: [email protected] > CC: [email protected] > > You need to replicate the private vlan to the second switch. > > Jey S. > Network Engineer > CCIE #41608 > > Sent from my iPhone > > > On 12 Mar 2014, at 15:16, M K <[email protected]> wrote: > > > > Hi allI have configured private vlans on one switch and all is working as > > expectedNow , I have connected another switch and placed one of the > > community Vlan hosts to the second switchMy question is from the second > > switch the promiscuous port will be the trunk port or there is additional > > configuration I should add? > > Thanks > > BR, > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
