Yup there seems to be a limit of 4 HSRP groups per int VLAN or GigE
adam -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Aaron Sent: Thursday, February 27, 2014 4:00 PM To: [email protected] Subject: [c-nsp] FHRP group exceeds hardware limit for the interface - ME3600 Am I only allowed 4 hsrp groups on an SVI in an ME3600 ? Aaron interface Vlan99 ip address 2.1.1.1 255.255.255.252 secondary ip address 3.1.1.1 255.255.255.252 secondary ip address 4.1.1.1 255.255.255.252 secondary ip address 5.1.1.1 255.255.255.252 secondary ip address 6.1.1.1 255.255.255.252 secondary ip address 1.1.1.1 255.255.255.252 end 3600-2(config-if)#standby 1 ip 1.1.1.2 3600-2(config-if)#standby 2 ip 2.1.1.2 3600-2(config-if)#standby 3 ip 3.1.1.2 3600-2(config-if)#standby 4 ip 4.1.1.2 3600-2(config-if)#standby 5 ip 5.1.1.2 %FHRP group exceeds hardware limit for the interface 3600-2#sh ver | in IOS Cisco IOS Software, ME360x Software (ME360x-UNIVERSALK9-M), Version 15.2(4)S1, RELEASE SOFTWARE (fc1) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
