Hi <snip> > > > >I don't know if you've the ability to match on packet size or not in > >hardware for QoS - if so, UDP/123 packets which *aren't* 76 bytes in > >length is a good classifier, as it leaves timesync ntp traffic alone > >and squelches everything else. > > I admit I didn¹t check the 7600 platform, but the 6500 doesn¹t seem to > support it. I can create the config, but when I apply it to the interface it > says > that the interface doesn¹t support matching on length :(
On 6500 acl length matching is only supported in software so it is not supported... At least on lan cards and up to pfc3 , I'm not sure if ES cards or sup2-t can do it. There is more info here on it http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper09186a00800c9470.shtml Brian > > Thanks! > > > > >----------------------------------------------------------------------- > >Roland Dobbins <[email protected]> // > <http://www.arbornetworks.com> > > > > Luck is the residue of opportunity and design. > > > > -- John Milton > > > > > >_______________________________________________ > >cisco-nsp mailing list [email protected] > >https://puck.nether.net/mailman/listinfo/cisco-nsp > >archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
