Hello,
Sorry if the subject matter is a bit downrange for the list, but I figured
folks here might have some info on this.
Currently I use rancid (clogin) to hit APs daily and change a PSK. This
is for guest access, and the script also writes the info to a simple HTML
web page. This works great.
However, it seems that there is essentially no such thing as a Cisco N or
AC AP that runs IOS (autonomous) anymore... If you have one AP - you are
expected to have a controller (even if some kind of ISR baked in deal).
So my question is either/or - can anyone confirm that Cisco is essentially
deprecating autonomous APs with newer radio tech ? Or - can someone point
me to something that could do what I'm doing now (linux+rancid+script+ap).
I would assume this solution would be non-Cisco.
Off list replies are fine to minimize noise.
Sorry this isn't about NTP reflection... ;)
--
Brandon Applegate - CCIE 10273
PGP Key fingerprint:
830B 4802 1DD4 F4F9 63FE B966 C0A7 189E 9EC0 3A74
"SH1-0151. This is the serial number, of our orbital gun."
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
