Unfortunately, it is not possible.. as the error is seen on the DBUs.So, it could be any linecard.
If you started seeing this issue recenty, you may want to check and see what was the last linecard or Sup you added to system and go from there.. To rule out a bad sup you can do switchover to standby if present, or move sup to other slot and see.. This is unfortnately, a process of elimitation in the older bus based architectures. sukumar On 1/15/14 5:56 PM, "PlaWanSai RMUTT CPE IX" <[email protected]> wrote: >Could you specify which card is a problem? > >Thank you very much. > >-----Original Message----- >From: Sukumar Subburayan (sukumars) [mailto:[email protected]] >Sent: Wednesday, January 15, 2014 10:25 PM >To: PlaWanSai RMUTT CPE IX; [email protected] >Cc: Panuwat Santukaw; Somphong Pokfai; [email protected] >Subject: Re: [c-nsp] EARL_L2_ASIC-SP-4-DBUS_HDR_ERR > >Error in the DBUS (data bus) header indicates that you have had hardware. > >Either a bad Sup or linecard or backplane.. If you have redundant sup, you >switchover to that and observe if the problem goes away. > >sukumar > >On 1/14/14 8:16 PM, "PlaWanSai RMUTT CPE IX" <[email protected]> >wrote: > >>Hi, >> Today, I saw this log in my 7609. And my customer told me that while > >>the log appear he saw the EIGRP down, up on his router. How to >>troubleshoot it? I can't open TAC case because the warranty is expired. >> >>Thank you very much. >> >>_______________________________________________ >>cisco-nsp mailing list [email protected] >>https://puck.nether.net/mailman/listinfo/cisco-nsp >>archive at http://puck.nether.net/pipermail/cisco-nsp/ > > >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
