Dears , We have two 6509 interconnected via port-channel of two 10Ge port carrying about 3Gb. the module used is WS-X6716-10T and only the two mentioned port are used on this module for the moment . We are now adding a monitoring probe that will be connected on this module , the estimated monitored traffic is about 8Gb . Since this module has an oversubscription rate of 4:1 , i need to check :
* On witch port it is recommended to connect the new probe without affecting the port channel * can one port on this module reach 8Gb of monitored traffic * the monitored traffic will be added to the actual Swicth load or it is transparent ? Br. BEN HAMMADI Kayssar NOKIA SOLUTION NETWORKS Lead Engineer -BroadBand Connectivity JNCIE-M (#471), JNCIE-SP (#1147), CCIP Mobile : +216 29 349 952 / +216 98 349 952 Skype : kayssar ben hammadi _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
