Thanks Everyone. Now the real challenge. Cards SPA-1X10GE-WL-V2 are listed as supported on the 12000 XR series chassis but require version 4.3.0 or later. I can find no such version on CCO. Did Cisco release a card with no OS to support it or am I just looking in the wrong place? The last version I see that is a full version is 4.2.3. The SMUs seem to be WAY too small for an upgrade as they are 0.17M in size. Anyone got an idea where to look?
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/XR12000/12ovspa.htmlshows in table 2-1 That this card is supported on this chassis under minimum IOS XR release of 4.3.0. Best. Lee On Thu, Dec 19, 2013 at 5:56 PM, Xuhu <[email protected]> wrote: > Since u had spare hardware already, just get the new OS and upgrade it > yourself, done. > > Br, > > On 20 Dec, 2013, at 3:38 am, Lee Starnes <[email protected]> wrote: > > Hello everyone, > > I am looking to get a SmartNet contract on our GSR 12410XR routers and am > having a VERY hard time finding anyone that can come up with the SKU for > it. I need to be able to upgrade our IOS-XR software but can't until I have > the contract. > > Does anyone have the SKU for it or know where I can get this from a known > good Cisco vendor? > > Thanks, > > Lee > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
