I have two links and i will run single AS Now , the subnet 192.168.0.0/24 for example will traverse which physical link in this case? (before applying any offset-lists)
> From: [email protected] > Date: Thu, 19 Dec 2013 08:42:10 -0500 > Subject: Re: [c-nsp] EIGRP Load Balance > To: [email protected] > CC: [email protected] > > 2 AS would not do the job if its connected routes, only if you learn > the destination via EIGRP, the 2 AS solution will work. > > Jey S. > Network Engineer > > Sent from my iPhone > > > On 19 Dec 2013, at 08:07, M K <[email protected]> wrote: > > > > HiI have two routers connected to each other via two serial connections I > > have two subnets on R1 : 192.168.0.0/24 and 192.168.1.0/24192.168.0.0/24 is > > used for Data and 192.168.1.0/24 is used for VoiceNow , I want to use the > > first connection for the Data traffic , and the other connection for Voice > > trafficAs well , I want to use the second link as backup for the first link > > if the Data traffic is down and vice versa for the voice trafficI am > > thinking of summerization on the second link , but my question should i > > implement one AS or more ? I do not want to use IP SLA and EEM , just EIGRP > > itself > > Any ideas are appreciated? > > BR, > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
