Anyway, if you go down this path by connecting vlans together using connect or vlan rewrite
Be aware of what could happen it you send STP BPDU's across You might see ports errdisabled, STP inconsistent or similar messages on the access switch CDP might also start complaining. Jon H Bøvre On 29. nov. 2013 17:33 "Jon Harald Bovre" <[email protected]> wrote: > Local Connect? > > Try This: > connect gig 3/1.500 gig3/1.501 > > Jon Harald Bøvre > > ---------------------------------------------------------------------- > ---------- > > > ----- Opprinnelig melding ----- > Fra: "Olivier CALVANO" <[email protected]> > Sendt: 29.11.2013 16:50 > Til: "[email protected]" <[email protected]> > Emne: [c-nsp] Vlan ? > > Hi > > a small question : > > i have a cisco 6503 with sup720, on this 6503, i have a interface: > > > interface GigabitEthernet3/1.500 > encapsulation dot1q 500 > > interface GigabitEthernet3/1.501 > encapsulation dot1q 501 > > > i want a ethernet link between vlan 500 and 501 > > it's possible ? > > thanks Olivier > _______________________________________________ > cisco-nsp mailing list <[email protected]> > <https://puck.nether.net/mailman/listinfo/cisco-nsp> > archive at <http://puck.nether.net/pipermail/cisco-nsp/> > _______________________________________________ > cisco-nsp mailing list <[email protected]> > <https://puck.nether.net/mailman/listinfo/cisco-nsp> > archive at <http://puck.nether.net/pipermail/cisco-nsp/> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
