What framing mode are you running and what is the underlying transmission? I have seen this before on 10G circuits running in wanphy mode and the only fix was to get better transmission (ie. not an STM-64c) and run lanphy :)
McDonald On Tue, Nov 19, 2013 at 9:07 PM, bas <[email protected]> wrote: > Dear All, > > We have a stubborn problem with one of our ASR9Ks. > A couple of upstream ports are limited to 8Gbps egress traffic, while > others are not affected. > > It is a 9010 chassis with two RSP-4Gs, and eight A9K-8T-L cards. > Of every card the first three ports are used for upstream (egress traffic), > and the following five ports are configured for downstream (ingress) > > There is no specific QoS configured on either side. > > The RSPs are running 4.2.3. > We've swapped both RSPs, and several linecards, however nothing seems to > change the behaviour. > > rrd graph here http://imgur.com/Td4KSGB > > Has anyone had experience with a situation like this? > > Thanks, > > Bas > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
