Just throwing this out here, but why are you bridging PPPoE customers which supposedly 'terminate' on the 7201? Why not L2TP LAC/LNS? With your 7201 acting as a LAC you can push the tunnels anywhere IP will go. Bridging IMHO is a nasty thing that should only be used where strictly necessary.
Ross > -----Original Message----- > From: cisco-nsp [mailto:[email protected]] On Behalf Of > Mike > Sent: Saturday, August 31, 2013 5:21 PM > To: 'Cisco-nsp' > Subject: [c-nsp] Bridging over PPP > > Hi, > > I have a location that has several PPPoE customers, which are > terminating on my 7201 router. I have a somewhat unreliable ethernet > link connecting these users to the router which I have decided to > replace with a link formed of bonded T1's. The question is can I somehow > create an ethernet bridge over bonded T1's (ppp multilink) or must I use > a VPN to tunnel the ethernet traffic thru? I am happy with and have an > ethernet bridging over vpn solution, it's just peformance and the fact > of needing another box at the far end site close to the users which is > ugly and undesirable. Any suggestions appreciated. > > Mike- > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
