On 29/08/13 17:45, "Rolf Hanßen" wrote:
How do I see if the correct features were enabled or which type (baseip,
ipservice, advipservice) is installed ?
Maybe somebody with a working and licensed router can compare the output ?
What happens if I reboot and the license was wrong (i.e. baseip only),
does the IOS reject commands in that case or is the whole licensing on
6500/7600just a dummy ?
That's not how 6500 works.
For 6500, on both sup720 and sup2T IIRC, the feature set is determined
by the image you boot. There's no license key for "advanced IP services"
- you just boot that image.
To see which "feature" is installed/enabled, just look to see which
images is booted.
The right to use the software comes from having purchased that version
of the software with the chassis, or having purchased an upgrade later on.
See also
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8802/ps6970/ps6017/qa_c67-661785.pdf
As an example - most of our 6500 purchases came with a line item for:
S733ZK9M-12218SXD
...which is the Advanced IP service package, and confers the right to
use that image (and smartnet confers the right to upgrade).
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
