Hi,
has anyone already tested NX-OS 6.2(2) on N7k with VRRPv3 and IPv6? I
have it running in the lab on a VPC pair and I always get exactly 15s
loss when the master changes to another host. Both logs look absolutely
okay, VRRP state is okay, the neighbors see each other
2013 Aug 28 08:39:28 cvr1-2wr %VRRPV3_LOG-5-VRRP_LOG_STATE: Vlan69
IPv6 group 2 state MASTER -> BACKUP
2013 Aug 28 08:39:28 cvr1-1wr %VRRPV3_LOG-5-VRRP_LOG_STATE: Vlan69
IPv6 group 2 state BACKUP -> MASTER
Config is
interface Vlan69
ip address 10.10.68.252/24
ip verify unicast source reachable-via rx
ipv6 address 2001:4ca0:0:ffff::1:2/64
ipv6 verify unicast source reachable-via rx
no shut
vrrpv3 1 address-family ipv4
address 10.10.68.254 primary
vrrpv3 2 address-family ipv6
address fe80::1 primary
VRRPv3 IPv4 is fast, as well as HSRPv2 IPv4 and IPv6.
Buggy?
Best Regards,
Bernhard
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
