Hello all,
        I used this pw-class on asr9k is work.

pw-class to-3750ME-vlan
  encapsulation mpls
   protocol ldp
   transport-mode vlan
  !
 !

Thank you very much.

-----Original Message-----
From: Tim Huffman [mailto:[email protected]] 
Sent: Thursday, August 22, 2013 9:00 PM
To: PlaWanSai RMUTT CPE IX; [email protected]
Subject: RE: [c-nsp] How to configuration mpls l2vpn between asr9k and 3750? 
Help me please!

Assuming you are using the ME-C3750-24TE , here's a sample config that's 
working for us (MPLS MUST be enabled on one of the special ES Uplink ports for 
any MPLS to work):

interface FastEthernet1/0/6
 description Customer-interface
 switchport trunk encapsulation dot1q
!VLAN 2643 is used as a native, to provide the customer !Internet transit as 
well as Pseudowire !The customer tags pseudowire traffic with VLAN 912 (or we 
tag it for them with a switch)  switchport trunk native vlan 2643 switchport 
trunk allowed vlan 912, 2643  switchport mode trunk  no cdp enable

interface Vlan912
 description pseudowire
 no ip address
!use the loopback of the other side of the pseudowire tunnel
  xconnect a.b.c.d 912 encapsulation mpls end

And on the other end (which is actually a 6503-E/Sup720, but should be similar):
interface GigabitEthernet2/45.912
 description pw-2pp-8nh-evergent
 encapsulation dot1Q 912
!use the loopback of the 3750
 xconnect w.x.y.z 912 encapsulation mpls end

Tim Huffman
Director of Engineering
Business Only Broadband
999 Oak Creek Dr, Lombard, IL 60148
Direct: 630.590.6012 | Main: 630.590.6000 | Fax: 630.986.2496 
[email protected]  |  http://www.bobbroadband.com/
Cell:  630.340.1925 | Toll-Free Customer Support:  877.262.4553
  Follow Us on LinkedIn  |    Follow Us on Twitter P please consider the 
environment prior to printing

-----Original Message-----
From: cisco-nsp [mailto:[email protected]] On Behalf Of 
PlaWanSai RMUTT CPE IX
Sent: Thursday, August 22, 2013 5:47 AM
To: [email protected]
Subject: [c-nsp] How to configuration mpls l2vpn between asr9k and 3750? Help 
me please!

Hello all,

                How to configuration mpls l2vpn between asr9k and 3750? Help me 
please!

 

Thank you very much.

_______________________________________________
cisco-nsp mailing list  [email protected] 
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to