Please try using ipv4 unnumbered Loopback X under the subscriber interface. Also add ipv4 point-to-point. Under the dynamic template add ipv4 unnumbered Loopback X.
Your config should look like this: inter loopback 10064 ipv4 100.64.248.129 255.255.255.192 interface Bundle-Ether1.3121 ipv4 point-to-point ipv4 unnumbered loopback 10064 dynamic-template type ipsubscriber IPSUB_TPL ipv4 unnumbered loopback 10064 -----Original Message----- From: cisco-nsp [mailto:[email protected]] On Behalf Of Nick Hilliard Sent: Friday, August 02, 2013 12:53 PM To: Olga Cc: [email protected] Subject: Re: [c-nsp] Cisco ASR1002 software images in the wild On 02/08/2013 11:29, Olga wrote: > Correct me if i'm wrong It's more complicated than this on the asr1000 platform. See the archive for more details. Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
