Hi Waris. 15.3(2)S
Mainly as reading through previous threads it was suggested to use this as it now has the queue-limit available Thanks Darren http://www.mellowd.co.uk/ccie On 27 Jul 2013, at 21:30, "Waris Sagheer (waris)" <[email protected]> wrote: > Darren, > Which image you are using? Based on that I can send you the write up. > > Regards, > -Waris > > On Jul 27, 2013, at 8:27 AM, "Darren O'Connor" <[email protected]> wrote: > >> Hi all. >> >> I've seen that the ME3600X has 44MB of buffer space for packets. I'm trying >> to work out how many virtual circuits I can push through the box before my >> buffers run empty. >> >> I know this is a difficult question, as a lot depends on how much traffic is >> going through each EVC at any one time. I need to know how to work it out >> though. >> >> As an example, let's say I'm using 12 ports each at a gig. Each port carries >> multiple point to point links separated by vlan tag. Certain customers would >> be paying for QoS and hence I'll shape to the needed speed and give priority >> to certain frames in a child class. If a customer were not paying for QoS I >> could simply police that customers frames going through the ME3600X. >> >> What maximum figures am I looking at in regards to maximum shaped traffic at >> any particular time? Or at least, how can I work this out? >> >> Thanks >> >> Darren >> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
