Gents totally stumped.
In IOS-XR 4.3.1 on ASR9006 there is a new feature under:
Vrf XXXXX
Address-family XXXX
Import from default-vrf route-policy YYYY
Export to default-vrf route-policy YYYY
This is supposed to allow route-leaking between the global table and VRFs
without having to use MP-BGP.
Has anyone tried this and gotten it to work?
Has I am having no luck.
As the feature is titled BGP Dynamic Route leaking I am assuming that it only
works for BGP routes and not IGP routes.
My example is:
Vrf tester
Address-family ipv4 unicast
Import from default-vrf route-policy
import-policy
!
Route-policy import-policy
If destination in ( 0.0.0.0/0 ) then
Pass
End-if
End-policy
!
Sh route:
B* 0.0.0.0/0 [20/0] via 192.168.200.2, 00:00:11
B 1.0.0.0/24 [20/0] via 192.168.200.2, 00:00:11
B 1.0.4.0/22 [20/0] via 192.168.200.2, 00:00:11
B 1.0.4.0/24 [20/0] via 192.168.200.2, 00:00:11
sh route vrf tester
Wed Jul 24 17:38:21.651 Summer
% No matching routes found
........
I have read the scant documentation on it and the postings in the supportforums
but nothing so far.
The tac case also seems to be progressing like a dead snail.
Any ideas?
thanks
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
