Yes we do also have some at one site where they sit at 16-18 celsius ;) all day without issues. Occasionally they complain about low warning threshold but they never fail.
I'm confused how the issue can remain despite a complete component swap, apart from the gbics. Is it even feasible they could cause a SP / fabric crash? Also just to confirm the original temperature issue is resolved be the kit is back at 21 again now. So this 'new' chassis crash is not a temperature issue I don't believe. Just has the same fabric error / crashdump. Makes little sense to me so I was hoping someone might have either seen something similar with 15.1 or GBICs causing crashes...? Sent from my iPhone On 5 Jul 2013, at 12:24, "Phil Mayers" <[email protected]> wrote: > On 05/07/13 12:22, Robert Williams wrote: >> Slightly warmer than that, a cosy 15 degrees Celsius I'm afraid... > > That's really weird. We have operated sup720 in places that cool. > >> Any ideas? > > None spring to mind, beyond a really odd hardware fault. Robert Williams Custodian Data Centre Email: [email protected] http://www.CustodianDC.com _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
