Gert Doering wrote: > > However, when I apply the following command to the interface: > > > > interface GigabitEthernet0/0 > > ntp multicast ttl 1 > > > > the routers again begins sending multicast NTP packets with ttl=28. > > > > What gives? > > "Don't do this, then" > > If you really care, open a TAC case, get a bug ID, and in 3-5 years, when > that particular network and router has long been retired, receive the > information that the particular IOS train that you are no longer using > is now bugfixed. > > Or maybe they will just change the documentation.
I was writing here in the hope that it was I who was doing something wrong, maybe did not read some what's new note. This "ntp multicast ttl 1" has worked for me for years, I have some Unix hosts configured as multicastclients. Now I'll have to change them into broadcastclients. Not a big deal, but the surprise was unpleasant. -- Victor Sudakov, VAS4-RIPE, VAS47-RIPN sip:[email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
