Hi , No if you need to use SLAAC , you should have configured /64 on the
interface
./Rati
On 06/06/2013 05:04 PM, Aaron wrote:
Thanks Jay, can you issue a /56 via SLAAC ? ...DHCPv6 ?.... in otherwords,
is there an automated/dynamic way to issue this /56 you mention ?
Aaron
-----Original Message-----
From: Jay Ford [mailto:[email protected]]
Sent: Wednesday, June 05, 2013 5:46 PM
To: Aaron
Cc: 'TJ'; 'Michael Nicks'; [email protected]; [email protected]
Subject: RE: [c-nsp] ipv6
Aaron:
Also, as an ISP you should delegate a IPv6 prefix (such as a /56) to each of
your customers rather than just a single address. We don't have that issue
because we consider our campus user devices as leaf devices, but customers
of an ISP are entitled to a prefix larger than /64 which they can divide
into
/64 subnets for their internal use.
Jay
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
