Also be sure to use ip pim ssm default
and sdm prefer applications By default "MDT mroutes" are 0... I have tested this on 15.3(2)S. Claes Jansson Gästabudstaden AB On 2013-05-23 08:38, PlaWanSai wrote:
I try to run Multicast VPN on the ME-3600 back-to-back with the 7609. It does not see pim neighbor. I tested on 15.1(2)EY4, 15.3(1)S and 15.3(2)S IOS version. I used this configuration between 7609 is work.test-co3600#sho ip pim vrf IPTV-M nei PIM Neighbor Table Mode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority, P - Proxy Capable, S - State Refresh Capable, G - GenID Capable Neighbor Interface Uptime/Expires Ver DR Address Prio/Mode test-co3600#Thank you very much. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
