Hello,
I did some searching on this, and couldn't find anyone else complaining of
it - so I figured I'd ask here.
Got some 5548UP's, they were running 5.1.something out of the box, just
put 5.2(1)N1(4) on them. Same issue with original code as well as new.
Cisco docs state there is a 'format' command. You should be able to use
this on usb1: for example (the USB port near mgmt0/console). Here is what
I have:
...
event Event Manager commands
find Find a file below the current directory
gunzip Uncompresses LZ77 coded files
gzip Compresses file using LZ77 coding
hardware Change hardware usage settings
install Upgrade software
...
It's not 'hidden' either.
n5kup-1# format
^
% Invalid command at '^' marker.
n5kup-1# format usb1:
^
% Invalid command at '^' marker.
Any info would be appreciated, even if 'yes it doesn't exist, you're not
crazy'. Thanks.
--
Brandon Applegate - CCIE 10273
PGP Key fingerprint:
8779 B023 7637 CEC8 C5C6 4052 664D 7E08 3CBB 1739
"SH1-0151. This is the serial number, of our orbital gun."
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
