Hello All, I don't know what's the "Add Path" attribute, could you illustrate more & send me the commands knowing that Routers' are IOS 2800 series. Thanks, Thank you & Best Regards, Sherif Mostafa
Date: Mon, 11 Mar 2013 08:21:38 -0700 From: [email protected] Subject: Re: [c-nsp] Route-Reflector & Sub-optimal Routing To: [email protected]; [email protected]; [email protected] Yes. You can do it with BGP "Add path" attributes. It should be a available now. -Judy --- On Mon, 3/11/13, Adam Vitkovsky <[email protected]> wrote: From: Adam Vitkovsky <[email protected]> Subject: Re: [c-nsp] Route-Reflector & Sub-optimal Routing To: "'sherif mostafa'" <[email protected]>, [email protected] Date: Monday, March 11, 2013, 1:19 PM >Is there any method to allow the Route-Reflector to send all routes to clients (not the best one)? If you have mpls in your core, you can use unique RD per VRF per PE -this will allow the RR to consider all the paths for a particular prefix as unique prefixes and advertise all of them to the PEs. adam _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
