Hi Adam, Thanks for quick response. I used the "sh mrib route" before but without "rate-per-route" config, will check asap.
2013/1/8 Adam Vitkovsky <[email protected]> > In XR its sh mrib route/sh mfib route but in order to get the bw rate you > have to have the following cmd enabled: > > multicast-routing > rate-per-route > > adam > > -- ERCIN TORUN _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
