Yes, I understand there are two standards which define VPLS PE Discovery and Pseudowire signalling:
RFC4761 - BGP Auto-discovery and BGP signalling RFC4762 - BGP Auto-discovery and LDP signalling Both are supported on the ASR9k, but IOS tends to support only LDP signalling (e.g. 7600 from 12.2(33)SRB). Cheers, Matt -----Original Message----- Message: 2 Date: Sat, 5 Jan 2013 22:15:14 -0600 From: "Aaron" <[email protected]> To: "'Pete Lumbis'" <[email protected]> Cc: [email protected] Subject: Re: [c-nsp] l2vpn vpls w/bgp autodiscovery - me3600x to asr9k Message-ID: <[email protected]> Content-Type: text/plain; charset="us-ascii" Yahoo! I had to change asr9k to "signaling-protocol ldp" (as tshooting goes, I may had superfluous stuff in here by now, so I'll pear back some later and see what was really needed) l2vpn bridge group gr1 bridge-domain bd1 interface GigabitEthernet0/0/0/10.1 ! vfi vf1 vpn-id 100 autodiscovery bgp rd auto route-target 64512:100 signaling-protocol ldp ! ! Me3600 has.... l2 vfi vpls1 autodiscovery vpn id 100 rd 10.101.12.251:32768 route-target export 64512:100 route-target import 64512:100 Aaron _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
