I don't see any instances of spanning tree running for various efp's I've created in my ME3600.
Is there something different with spanning tree and the Me3600x that is much different than older cisco switches ? voice-3600#sh spanning-tree interface g0/4 efp 336 no spanning tree info available for GigabitEthernet0/4 voice-3600#sh run | in span spanning-tree mode rapid-pvst spanning-tree extend system-id spanning-tree vlan 336 priority 24576 voice-3600#sh spann vl 336 Spanning tree instance(s) for vlan 336 does not exist. voice-3600#sh run in g0/4 interface GigabitEthernet0/4 description ring 3 - 3y6 vlans switchport trunk allowed vlan none switchport mode trunk load-interval 30 service instance 316 ethernet encapsulation dot1q 316 rewrite ingress tag pop 1 symmetric bridge-domain 316 ! service instance 336 ethernet encapsulation dot1q 336 rewrite ingress tag pop 1 symmetric l2protocol peer stp bridge-domain 336 ! End _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
