If it did, then there is a strange/orphaned gig0 still showing.... And Andrew K says he still knows about g0 so I'm assuming he's using it...
Aaron -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Steve Dodd Sent: Wednesday, December 19, 2012 2:44 PM To: [email protected] Subject: Re: [c-nsp] me3600x - g0/25 ?! Did the management port get renumbered? -Steve -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Andrew K. Sent: Wednesday, December 19, 2012 1:36 PM To: [email protected] Subject: Re: [c-nsp] me3600x - g0/25 ?! I am able to confirm I see the same thing on my ME3600x running the same code 15.3(1)S. On 12/19/2012 3:29 PM, Aaron wrote: > Any idea why I see an interface g0/25 on my me3600x? this may be > following the ios upgrade to 15.3(1)S > > > > There are only 24 physical sfp interfaces on this box > > > > Aaron > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
