Hi Jeffrey, You can use vlan 4048 and 4049 as described on the links below but the other vlans are reserved and their allocation cannot be changed.
https://supportforums.cisco.com/thread/2148709 http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_010000.html Best regards, Andras On Thu, Dec 6, 2012 at 5:48 PM, Jeffrey G. Fitzwater <[email protected]>wrote: > We are looking at using the CISCO UCS blades but we have a problem with > the vlan ID we have in use not available on the UCS blade. > > Is there any way to change the internal VLAN range (3968 to 4048) that is > fixed in in the USC blade code? > > They fixed this problem for the NX-OS to allow it to be user defined so > there is no conflict with existing vlan ID a customer may already be using. > > > > Thanks for any help. > > > > Jeff Fitzwater > OIT Network Systems > Princeton University > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
