That would explain the problems with XR code on the PRP-2 where we are seeing high write loads and the CF stops responding. The IC2 bus must be getting overrun.
Mack -----Original Message----- From: Mikael Abrahamsson [mailto:[email protected]] Sent: Thursday, June 09, 2011 11:59 PM To: Nikolay Shopik Cc: Mack McBride; [email protected] Subject: Re: [c-nsp] Memory leak on in latest 12.0S on GSR? *Solved* On Thu, 9 Jun 2011, Nikolay Shopik wrote: > I think only explanation here is Cisco had large stock of quite old > CF-readers/hardware which is slow as hell(because of age) and thus still > installing them. Because I can't remember any recent and even 2-3 years > old CF cards or CF-ATA adapters that slow. Nah, it's not really the card reader itself, it's that the card reader is connected using I2C bus that is quite slow. > Or IOS implementation of IO is just plain suck, whatever this is > low-level access or VFAT implementation problems. It can be fixed via > software update. Unfortunately not. -- Mikael Abrahamsson email: [email protected] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
