Hi, On 31 May 2011 08:33, cisco-pe <[email protected]> wrote: > Hello Guys, > We are planning to deploy NAT44 in a pair of CRS-1/16 (Toll gates) located > on differentes sites, using CGSE card. > Could you help us with some recommendations about how to implement the NAT44 > high availabilty using CGSE modules on CRS-1 ?
I'm unable to decipher your diagram, but with NAT you have to take the following things into consideration: 1. Currently CGSE does not offer hot-standby so, even if you have two in one chassis the sessions will have to be re-established (take the number of sessions into consideration if you do not want very long outage) 2. With inter-chassis fail-over you have to relay on routing protocols convergence and ability to trigger routing convergence if only the CGSE card fails, but not the RP or uplink line cards. 3. Do you want the CGSE to participate in MPLS or not, if so are you running TE or only LDP? 4. When the sessions are dropped some customers' sessions will not come back automatically, user intervention will be necessary. Depending on your customer base this might not be a big problem. 5. How are you going to scale the solution when number of subscribers/sessions increases? 6. Do you have to record all mappings between inside/outside IPs (for example for lawful intercept, charging or some other reasons)? IMHO the convergence time will greatly depend on the protocols you're natting and number of flows. kind regards Pshem _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
