That makes sense as ISIS p2p adjacency is initialized by rx of a ISHs through the ES-IS protocol followed by the exchange of the IIH
I was trying to figure out the mac layer mechanism difference between the p2p and lan and your post helped me to fill in the gaps Thanks a bunch Olga adam -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Olga Sent: Tuesday, May 31, 2011 3:03 PM To: cisco-nsp Subject: Re: [c-nsp] IS-IS on L3 vlan interfaces One time we had the same issue -first wth p2p command configured (removed this command and adjacency came up), and second -we added p2p command to broadcast link and adjacency came up. Both times the problem was with juniper filtering -we used transit provider. the point is that MAC addreses for Serial and LAN hello are different The MAC-level broadcast addresses are: 01-80-C2-00-00-15 for Level 2 adjacencies (AllL2ISs) 01-80-C2-00-00-14 for Level 1 adjacencies (AllL1ISs) The MAC-level point-to-point addresses are: 09-00-2B-00-00-04 (AllEndSystems) 09-00-2B-00-00-05 (AllIntermediateSystems) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
