Do you have one 12K running regular IOS ? I would try to do the upgrade there and also confirm that the LC has in fact 1GB of mem.
Regards, Antonio Soares, CCIE #18473 (R&S/SP) [email protected] http://www.ccie18473.net -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Lee Starnes Sent: sábado, 28 de Maio de 2011 00:20 To: [email protected] Subject: [c-nsp] 4GE-SFP-LC ROMMON upgrade in IOS-XR Hi All, I have an upgrade problem that there seems to be no fix for. Has anyone run into this before and if so, how do you go about getting it to upgrade? Our problem is this. We need to install some 4GE-SFC-LC cards in an IOS-XR chassis. They won't work unless they have 1G of ram. You can't get the card to see more than 512M of ram without doing a ROMMON upgrade (Guess my cards have an older version). IOS-XR won't bring the cards online to be able to do the ROMMON upgrade because not enough ram, but you can't get enough ram in it without upgrading ROMMON. We are running V 4.0.1 of XR currently with both PRPs running 1.24 ROMMON. Is there any way to get around this issue. I did several searches for upgrading ROMMON on LCs for XR but could not find anything that mentioned this kind of issue. Thanks, -Lee _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
