Looks like you are hitting a new defect that starts in your code: CSCtq24633
It's not yet fixed so configuring no be for the time being would be the
best available workaround until the fix is integrated in the next release.
Regards,
John
On 5/16/11 6:31 AM, Pavel Skovajsa wrote:
Hello,
After upgrading to 12.2(58)SE1 on a ME3400 seems like all the input CIR with
BC configured like this stopped working:
policy-map CIR_4096
class class-default
police cir 4096000 bc 256000
conform-action transmit
exceed-action drop
When trying to apply the following to an interface it produces this:
switch(config)#int fa0/1
switch(config-if)#service-policy input CIR_4096
extended burst (be) cannot be configured for this interface
Configuration failed!
switch(config-if)#
Interesting enough this worked fine on anything before 12.2(58)SE1. Does
somebody know whether this is a bug or a newly "discovered" hw limitation
that is never going to be fixed?
BTW it works fine when I remove the BC from the policy map, but I do not
want to reconfigure ton of switches:
policy-map CIR_4096
class class-default
police cir 4096000
conform-action transmit
exceed-action drop
-pavel skovajsa
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
