Yes, I just came up with this 10 permit tcp any range 3300 3315 any (3422 matches)
along with match protocol citrix. I am looking for a very very specific way to classify and mark these packets. Regards, 2011/5/10 Harold 'Buz' Dale <[email protected]> > Have you looked at > http://www.cisco.com/en/US/tech/tk331/tk336/technologies_tech_note09186a00800fad74.shtml > I'm not sure if that's what you are looking for exactly but should be a > starting point to build an ACL and then mark based on it. > Good Luck, > Buz > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of Jeferson Guardia > Sent: Tuesday, May 10, 2011 10:54 AM > To: [email protected] > Subject: [c-nsp] QoS marking SAP packets > > List, > > I am currently working on some QoS model to handle SAP packets, apparently > someone before me tried a police to mark things coming from CITRIX > protocol. > Is there a more specific way to match SAP packets? Does anyone have > experience with that? I am trying to be more specific than match protocol > citrix... > > Regards, > > Jeferson > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Jeferson Guardia CCIE #28157 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
